bidet attachment easy clean

bidet attachment easy clean

Model No.B012

Key Specifications / Features:

bidet attachment dual nozzle, bidet attachment easy clean, bidet attachment hose, easy to install bidet attachment, bidet attachment knob, bidet attachment luxe

Detail Information

No Need Electricity 
Using the bidet attachment can replace and reduce the use of traditional toilet paper. Our classic bidet attachment has adjustable cold water, which can effectively avoid paper friction, protect fragile skin, and bring you a milder and more hygienic experience. Non-electricity design can save a lot of electricity bills, perfect for men, women, new and old moms. 

Dual Spray Nozzles
Bidet attachment features dual nozzles for two spray modes: front cleaning for women's private, rear cleaning for men & women.  upgrades knob switch to button design for easier to switch between patterns. 

Easy to Install
The bidet attachment for toilet comes with all the premium components and instructions needed for installation. With the leak-proof teflon tape, the stainless steel braided hose can better prevent leakage and durable. No plumber and special tools required, easily installs on most standard two-piece toilets without worrying about mismatches, perfect for most Diyers.

installation steps

Step 1:

Shut off the water supply valve on the wall. Then drain all the water in the toilet tank.

Place bidet on the toilet and align the bidet's adjustable plate holes to the toilet seat holes and screw the toilet seat back on the toilet.

Step 2:

Inspect unit, accessories and their parts. Make sure T-Adapter has the black rubber washer (The black rubber washer must be placed on the T-Adapter adapter as shown in the figure).

Step 3:

As shown in the figure: Try connecting all parts that need connection to make sure that they fit.

Optional: Apply thread seal tape to the threads of the bidet water inlet and T-Adapter.

1. Connect the T-Adapter to the toilet tank water inlet. Hand tighten.

2.Connect the other end of the metal braided metal hose to the T-Adapter. Hand tighten.

3.Connect the existing water supply flexible hose to the other end of the T-Adapter. Hand tighten.

Step 4:

Connect one end of the flexible braided metal hose to the water inlet of the bidet. Hand tighten.

Open the water supply valve.

Check connections for water leaks.

Tighten connections where there is a leak until leak stops.